Products | KOGANEI Corporation

Products

Full-text

Air cylinders (clean equipment)

Mini bit cylinder MBDA (clean equipment)

● Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)
Pen cylinder PBDA

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. A lineup of double acting types and single acting push types.
Multi mount cylinders (clean equipment)

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.
Double acting type basic cylinders (clean equipment)

● Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving.
Basic cylinders: With guide (clean equipment)

● Φ8 to 40 mm [0.315 to 1.575 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option.
Jig cylinder C series (clean equipment)

● Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for total space saving.
Jig cylinder low-friction specification CDAZ (clean equipment)

● Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation
Slim cylinders (clean equipment)

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep.
Jig cylinder with guides (clean equipment)

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability.
Mini guide slider MGA (clean equipment)

● Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs.
Twin rod cylinder TDA (clean equipment)

● Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder.
Twin rod cylinders (clean equipment)

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
Flat rodless (clean equipment)

● Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation.
Air hands NHBDPG (clean equipment)

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification.
Piston type RAP (clean equipment)

● Rack-and-pinion type clean room specification rotary actuator.

Categories

SSL GlobalSign Site Seal