Events

Campaign Information

We will guide you through the various campaigns.

There is no campaign information.

Exhibition Information

We will guide you through the various exhibitions.

17th MECHANICAL COMPONENTS AND MATERRIALS TECHNOLOGY EXPO(M-TECH)

M-TECH Official Site
17th MECHANICAL COMPONENTS AND MATERRIALS TECHNOLOGY EXPO(M-TECH)
Exhibition Detail
Date June 19(Wed) - 21(Fri), 2013
Venue Tokyo Big Sight, Tokyo, Japan
Booth No East 2 12-44
Outline
Exhibits at Koganei Booth

At our booth we would like to introduce new Magnet Type Rodless Cylinder "MRB Series" having features of compact size, light weight body, and high rigidity. We will also show new size variations for our popular Mini Guide Slider "MGA Series".We also show the "Problem Solution Map" that proposes our solutions for your daily problems.

Features of Exhibits

Magnet Type Rodless Cylinder MRB Sereies

The built-in linear guide enables the cylinder to cover a wide speed range from low to high speed (10-1000 mm/s). NSF H1 food grade lubricant specifications will also be in lineup.

no-image

Mini Guide Slider MGA Series

New bore sizes (25 and 32mm) will be available for the highly accurate Mini Guide Slider. The new sizes have much higher cylinder thrust and rigidity with space-saving designs.

Mini Guide Slider MGA Series

Hi-speed Solenoid Valve K Series

The Hi-speed Solenoid Valve K Series have realized the highest speed response in the industry with low power consumption.

Hi-speed Solenoid Valve K Series

iB-Cyclone

The iB-Cyclone is a completely new water separator, which uses centrifugal force generated by high-speed cyclone air. Also no filter element is used, allowing maintenance-free operation.

iB-Cyclone

16th MECHANICAL COMPONENTS AND MATERRIALS TECHNOLOGY EXPO(M-TECH)

M-TECH Official Site
16th MECHANICAL COMPONENTS AND MATERRIALS TECHNOLOGY EXPO(M-TECH)
Exhibition Detail
Date June 20(Wed) - 22(Fri), 2012
Venue Tokyo Big Sight, Tokyo, Japan
Booth No East 3 8-50
Outline
Exhibits at Koganei Booth

Koganei will introduce new products such as "iB-Cyclone", "iB-Flow", "Micro Ejectors FME Series", and other products.

Features of Exhibits

iB-Cyclone

iB-Cyclone uses a high-speed cyclonic system to maintain water separation rates even if flow is increased. Separation performance is always steady small to large flow rates.

iB-Cyclone

iB-Flow

iB-Flow is a new digital flow controller to adjust automatically and measure actuation time of a cylinder.

iB-Flow

Micro Ejectors FME Series

Contributing Energy-saving and Lower exhaust noise. Low exhaust noise in the industry highest standard. (When equipped low exhaust noise maffler).

Micro Ejectors FME Series

international fluid power exhibition 2011(IFPEX2011)

IFPEX2011 Official Site
international fluid power exhibition 2011(IFPEX2011)
Exhibition Detail
Date July 20(Wed) - 22(Fri), 2011
Venue Tokyo Big Sight, Tokyo, Japan
Booth No East 5 5F-2
Outline
Exhibits at Koganei Booth

Koganei will introduce new products such as Linear Stepping Actuator "iB-Move", neither an air cylinder nor a conventional robot, and Digital Flow Controller "iB-Flow".Also, Koganei will exhibit High-speed 2-port Valve "K2 Series", using industry-first solenoid technology (patent pending), and other products.

Features of Exhibits

iB-Move

iB-Move is a new linear stepping actuator with features such as Easy operation, Easy setting, Low price, Silent & Clean and Maintenance free.

iB-Move

iB-Flow

iB-Flow is a new digital flow controller to adjust automatically and measure actuation time of a cylinder.

iB-Flow

High-speed 2-port Valve K2 Series

Industry first! Using new solenoid technology (patent pending)!
High-speed 2-port Valve K2 Series has advantages of direct acting 2-port valves and features such as Compact (10mm width), High-speed response (1-3ms when turned on), Low power consumption (2-24W), Large flow rate (55-140L under 0.4Mpa), Environmental protection (IP65 equivalent), etc.

High-speed 2-port Valve K2 Series

40th INTERNEPCON JAPAN

40th INTERNEPCON JAPAN
Exhibition Detail
Date January 19(Wed) - 21(Fri), 2011
Venue Tokyo Big Sight, Tokyo, Japan
Booth No East 34-30
Outline
Exhibits at Koganei Booth

Koganei will introduce new products such as Linear Stepping Actuator "iB-Move", neither an air cylinder nor a conventional robot, and Digital Flow Controller "iB-Flow". Also, Koganei will exhibit High-speed 2-port Valve "K2 Series", using industry-first solenoid technology (patent pending), and other products.

Features of Exhibits

iB-Move

iB-Move is a new linear stepping actuator with features such as Easy operation, Easy setting, Low price, Silent & Clean and Maintenance free.

iB-Move

iB-Flow

iB-Flow is a new digital flow controller to adjust automatically and measure actuation time of a cylinder.

iB-Flow

High-speed 2-port Valve K2 Series

Industry first! Using new solenoid technology (patent pending)!
High-speed 2-port Valve K2 Series has advantages of direct acting 2-port valves and features such as Compact (10mm width), High-speed response (1-3ms when turned on), Low power consumption (2-24W), Large flow rate (55-140L under 0.4Mpa), Environmental protection (IP65 equivalent), etc.

High-speed 2-port Valve K2 Series

SEMICON JAPAN 2010

SEMICON JAPAN Official Site
SEMICON JAPAN 2010
Exhibition Detail
Date December 1st(Wed.) - 3rd(Fri.),2011
Venue Makuhari Messe TOKYO JAPAN
Booth No 7D-715
Outline
Exhibits at Koganei Booth

Koganei will introduce new products such as Linear Stepping Actuator "iB-Move", neither an air cylinder nor a conventional robot, and Digital Flow Controller "iB-Flow". Also, Koganei will exhibit High-speed 2-port Valve "K2 Series", using industry-first solenoid technology (patent pending), and other products.

Features of Exhibits

iB-Move

iB-Move is a new linear stepping actuator with features such as Easy operation, Easy setting, Low price, Silent & Clean and Maintenance free.

iB-Move

iB-Flow

iB-Flow is a new digital flow controller to adjust automatically and measure actuation time of a cylinder.

iB-Flow

High-speed 2-port Valve K2 Series

Industry first! Using new solenoid technology (patent pending)!
High-speed 2-port Valve K2 Series has advantages of direct acting 2-port valves and features such as Compact (10mm width), High-speed response (1-3ms when turned on), Low power consumption (2-24W), Large flow rate (55-140L under 0.4Mpa), Environmental protection (IP65 equivalent), etc.

High-speed 2-port Valve K2 Series

SEMICON JAPAN 2008

SEMICON JAPAN Official Site
Exhibition Detail
Date December 3, 2008 (Wed.) - December 5,2008 (Fri.)
Venue Makuhari Messe TOKYO JAPAN
Booth No 5D-621
Outline
Exhibits at Koganei Booth

We'll propose "Electric CT Pump" suitable for dispensing photoresist liquid for thin film forming in the wet process and for the quantitative dispensing of polyimide, as well as "Air-driven Tubephragm Pump" for the first time. In addition, new products of "Static Electricity Removing Unit", "Solenoid Valve" and "Shock Absorber" will be shown here.

Features of Exhibits

Electric CT Pump

Next-generation electric dispense pump corresponding to micronizing semiconductor wafers. The world' first CT pump construction is developed, featuring low particle contamination, good bubble removal, simple structure and high accuracy.

Electric CT Pump

Ionizer Bar Type

It speedily removes static electricity from a wide work. The newly-developed AC method produces a great quantity of homogeneous ions, which can perform well-balanced high-speed static removal.

Ionizer Bar Type

Clean System Shock Absorber

Low particle generation: Corresponds to cleanliness JIS ISO Class 5 (FED-STD Class 100) in 0.1 micro meter particle equivalent. Silicone-free: No silicone is used in the operating oils and plastic parts.

Clean System Shock Absorber

international fluid power exhibition 2008(IFPEX208)

international fluid power exhibition 2008(IFPEX208)
Exhibition Detail
Date April 22, 2008 (Tues.) - April 25,2008 (Fri.)
Venue Tokyo Big Sight, Ariake, Tokyo, JAPAN
Booth No East Fifth Hall 5F-20
Outline

Now printing

SEMICON JAPAN 2007

SEMICON JAPAN Official Site
Exhibition Detail
Date December 1st(Wed.) - 3rd(Fri.),2011
Venue Makuhari Messe TOKYO JAPAN
Booth No 5B-306
Outline
Exhibits at Koganei Booth

We will propose the volume reduction of chemical liquid used for thin film forming in the wet process!! "CT Pump" and "Bellows Pump" suitable for dispensing photoresist liquid and polyimide, "Air-operated Valve" optimum for minute flow rate adjustment, and then customized products such as "Dispense Unit" using CT Pump, "Chemical Liquid Diluting Equipment" and so on.

Features of Exhibits

CT Pump

Next-generation electric dispense pump corresponding to micronizing semiconductor wafers. The world' first CT pump construction is developed, featuring low particle contamination, good bubble removal, simple structure and high accuracy.

CT Pump

Fluororesin Equipment

This is a series of small solenoid valves and air-operated valves suitable for controlling chemical liquid with a small flow rate. PFA, PTFE, SUS, etc are available for the body material.

Fluororesin Equipment

PTC ASIA China 2007

Exhibition Detail
Date October 10, 2007 (Wed.) - October 13,2007 (Sat.)
Venue Shanghai New International Expo Center (SNIEC) CHINA
Booth No Hall 3, Booth A-2
Outline
Exhibits at Koganei Booth

A wide variety of products will be exhibited. They include; EP Sensors, Static Electricity Removing Units and Ion Wipers which are most suitable for electronics manufacturing and implementation, and then Solenoid Valves F Series produced within China.

Booth Outline

The below photos show the image of Koganei Booth, although it may differ from the actual one. Click them for enlargement.

photo
photo
photo
photo
photo
photo

Seminar Information

We will guide you through the various seminars.

There is no seminar information.