Products | KOGANEI Corporation

Products

Full-text

Mini guide sliders MGA series

Double acting type

● Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom.
Side mounted double acting type

● Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping.
Double acting type with side-mounted buffer

● Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer.
Double acting type with end keep

● Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
Back side piping specification

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available.
Back side piping specification with buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.
Double acting type with stroke adjustment buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup.
Double acting type with output side stroke adjustment buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end.
Double acting type with output side and input side stroke adjustments

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup.
Double acting type with output side and input side stroke adjustment buffers

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end.
Double acting type with buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end.
Double acting type with buffer and end keep

● Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.

Categories

SSL GlobalSign Site Seal