Air hands
-
- Parallel type Air Hand NHC1 Series
- ● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models.
-
- Parallel type NHBDPG with linear guide
- ● Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
-
- Parallel type NHBDPGL with linear guide
- ● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
-
- Parallel type NHBDPGY with linear guide
- ● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type with linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
-
- Parallel type NHBDPGJ with linear guide
- ● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type with dust cover. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
-
- Parallel type with cross roller bearing NHBDPA
- ● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Finger type with dust cover. Cross roller for high rigidity. Perfect for chucking and handling.
-
- Parallel type NHBDP
- ● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
-
- Swing type NHBDS
- ● Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
-
- 180 Degree Open/Close Type NHBDSL
- ● Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. 180 degree finger type. Perfect for chucking and handling.
-
- 180-degree open/close type with guides NHBDSLG
- ● Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. 180 degree open/close type. Employs a thrust bearing for high accuracy and high rigidity. Perfect for workpiece escape.
-
- Flat type air hand with linear guide
- ● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force. A wide range of variations: synchronous types, asynchronous types, long types.
-
- L hand with linear guide
- ● Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. With linear guide and cam drive for finger operation that is perpendicular to the cylinder operation axis. Twice the gripping power of previous models.
-
- Wide type air hand WHDP
- ● Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
-
- 3-finger hand with linear guide
- ● Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger mechanical hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc.
-
- Parallel type mechanical hands
- ● Opening and closing by external operation supported. Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.)
-
- Mechanical drive hand with linear guide
- ● Equipped with linear guide and can be opened and closed by external operation. Mechanical hand that does not require air piping.
-
- Rubber hand series
- ● Grip type that grips the outer diameter of the workpiece with inflated rubber. Inner diameter gripping pick type is also available.
-
- Systematic handling module
- ● Handling module with standardized functions for the robot hand unit. Shorter design time and lower cost.
-
- Systematic handling module micro series
- ● Handling module with standardized grasping functions for the robot hand unit. Shorter design time and lower cost.
