Product Search

All / 648 results

<< < 1 2 3 4 > >>

005_ALL - Micro 3-port Solenoid Valve 005 Series

● 5.9 mm [0.232 in] valve width, 0.1 mm2 [0.0002 in2]effective area, ultra-compact 3-port solenoid valve that contributes to making the device unit more compact and lighter in weight!
010_ALL - Solenoid valve 010 series

● Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders. 10 mm [0.394 in] valve width, 1.7 W low power consumption compact configuration solenoid valve.
025_ALL - Solenoid valve 025 series

● 0.5 W low power consumption direct acting type solenoid valve. A solenoid with surge suppression enables direct drive by an integrated circuit.
030_ALL - Solenoid valve 030 series

● Perfect for operation control of small-size actuators with a double acting or single acting cylinder bore sizes of 6 to 20 mm [0.236 to 0.787 in].
050_ALL - Solenoid valve 050 series

● Poppet type solenoid valve, boasting high reliability and durability, for cylinders with diameters of 6 to 25 mm [0.236 to 0.984 in]. A direct acting valve with a low pressure specification actuator for plenty of versatility.
062_ALL - Round type solenoid valve 062, 126 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
1000_ALL - Round type solenoid valve 1000 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
100_ALL - Solenoid valve 100 series

● Solenoid valve that is perfect for operation control of 20 to 50mm [0.787 to 1.969 in] diameter cylinders or as a low-pressure specification actuator. Outstanding functional versatility: selector valve, divider valve, etc.
110_4A_ALL - Air piloted valve 110-4A Series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
110_ALL - Solenoid valve 110 series

● A versatile series that meets the needs of operation control of 20 to 40 mm [1.575 to 30150 in] diameter cylinders and a wide range of other applications.
112_ALL - Solenoid valve 112 series

● An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration.
1250_ALL - Round type solenoid valve 1250 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
125A2_2503A2_ALL - Double air-piloted valves 125A2, 250A2, 2503A2

● Double pilot type air-piloted valves, long-life, highly reliable air valves.
125A_500A_ALL - Air piloted valve 125A, 250A, and 500A series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
125LA_ALL - Round type solenoid valve 125LA series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
125_ALL - Round type solenoid valve 125 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
126_ALL - Round type solenoid valve 126 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
180_4A_ALL - Air piloted valve 180-4A Series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
180_ALL - Solenoid valve 180 series

● A versatile series that meets the needs of operation control of 20 to 80 mm [0.787 to 30150 in] diameter cylinders and a wide range of other applications.
182_ALL - Solenoid valve 182 series

● An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration.
200_ALL - Solenoid valve 200 series

● Solenoid valve that is perfect for operation control of 32 to 80 mm [1.260 to 3.150 in] diameter cylinders or as a low-pressure specification actuator. Outstanding functional versatility: selector valve, divider valve, etc.
240_4A_ALL - Air piloted valve 240-4A Series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
240_ALL - Solenoid valve 240 series

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. A wide variety of lead wire connections and stacking manifolds.
250-4A_ALL - Diaphragm type air-piloted valve 250 and 2503 series

● Diaphragm type air-piloted valves, spring return type 4 (5)-port valves, and directional control valves with little of the leaking that is characteristic of diaphragms.
250_ALL - Round type solenoid valve 250 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
253_503_753ALL - Round type 3-position solenoid valve 253,503,753 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
254-4A_ALL - Air piloted valve 254-4A Series

● Of all pneumatic control 5 ( 4) optimal way valve to the pilot valve , long life , air valve , which boasts a high-performance .
254_ALL - Round type solenoid valve 254 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
300V_600V_ALL - Residual pressure exhaust valves (multi series)

● Multi series residual pressure exhaust valve 300 V series
300_4A_ALL - Air piloted valve 300-4A Series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
300_ALL - Solenoid valve 300 series

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. High reliability, even without lubrication.
375A_1250A_ALL - Air piloted valve 375A, 501A, 750A, 1000A, 1250A series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
375_1250_4A_ALL - Air-piloted valve 375-4A,501-4A,750-4A,1000-4A,1250-4A series

● Of all pneumatic control 5 ( 4) optimal way valve to the pilot valve , long life , air valve , which boasts a high-performance .
375_ALL - Round type solenoid valve 375 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
400HV_ALL - Lever type handle valve 400 HV series

● Perfect for air cylinder switching. Manual switching valve with slide valve structure. Rotary type (slide lever) for reliable switching.
430_ALL - Solenoid valve 430 series

● For actuators with cylinder bore sizes of 50 to 300 mm [1.969 to 11.811 in]. Plugin type that is stackable for simple addition and subtraction of units.
501_ALL - Round type solenoid valve 501 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
50VZ - Residual pressure exhaust valve 50VZ (Rc thread , FRZ series)

● (Rc thread) FRZ series: Residual pressure exhaust valve 50VZ series
50VZ_NPT - Residual pressure exhaust valve 50VZ (NPT thread , FRZ series)

● (NPT thread) FRZ series: Residual pressure exhaust valve 50VZ series
600_4A_ALL - Air piloted valve 600-4A Series

● Long-life, high-performance air valves that are perfect for all pneumatic control master valves and pilot valves.
600_ALL - Solenoid valve 600 series

● For cylinder bore sizes of 100 to 180 mm [3.937 to 7.087 in]. Perfect for operation control of large-size actuators. Large size, no lubrication, high reliability.
750_ALL - Round type solenoid valve 750 series

● High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
8Z_ADAPTER - FRZ Series Modules and Adapters (Rc thread)

● (Rc thread) Modules for linking with the FRZ Series, FRZB Series, CMZ, iB-Cyclone, and more.
8Z_ADAPTER_NPT - FRZ Series Modules and Adapters (NPT thread)

● (NPT thread) Modules for linking with the FRZ Series, FRZB Series, CMZ, iB-Cyclone, and more.
8Z_SW_MODULE - FRZ Series Switch Modules　(Mpa Gauge)

● (Mpa Gauge)Pressure switch module for FRZ and FRZB Series. Note: Cannot be used in combination with the FRZ Series FRZ3_ or RZ3_.
8_BRACKET_ALL - Large FRL series module adapters

● Adapter linked to the large FRL.
8_BRACKET_MULTI_ALL - Multi series module adapters

● Adapter linked to the FRL multi series.
AD_ALL - Multi series: Auto drains

● Auto drain that can be equipped on the FRL multi series. Auto draining of liquid collected in the bowl.
AFDPG - Double acting synchronous type

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Rack-and-pinion mechanism enables synced left and right lever operation. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force.
AFDPGH - Double acting asynchronous type

● Φ8 to 12 mm [0.315 to 0.472 in] cylinder bore. Levers are individually driven by different bore size cylinders, and the lever with the stronger gripping force becomes the gripping fixed point. Linear guide for high rigidity and thin body design.
AFDPGL - Double acting Synchronous type (long type)

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Synchronous long stroke type. Linear guide for high rigidity and a thin body design that is perfect for a wide range of workpiece gripping.
AFDPG_ALL - Flat type air hand with linear guide

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force. A wide range of variations: synchronous types, asynchronous types, long types.
AGTB - Double acting type with double guide

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving.
AGTC - Double acting type with integrated guide

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving.
AGT_ALL - GT Slide Table B Type

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving.
AHB_ALL - Air bleeders AHB

● Bleeds air bubbles accumulated in the low pressure hydraulic circuit, which enables stable speed control.
AHC_ALL - Air-hydro converter AHC

● No hydraulic unit is used, which eliminates pulsating and enables greater speed control accuracy.
ARS - Double acting type with guides

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Workpiece table with twin rod cylinder and seven guides for high accuracy, high rigidity, and high output.
ARSK - End keep type with guides

● Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
ARSZ - Shock absorber type with guides

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. A shock absorber at the stroke end absorbs end impact force and allows stroke adjustment.
ARS_ALL - Rod slider ARS series

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Workpiece table with twin rod cylinder and seven guides for high accuracy, high rigidity, and high output.
ARWT_ALL - Index table type RWT

● Air operated index table that uses an air signal and latch mechanism for prescribed angle and prescribed direction rotation.
ATBDA - Double acting bearing type

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Two rods do not require guides. A linear ball bearing maintains high non-rotating accuracy and tip deflection accuracy, even at full stroke.
ATBDAD - Double acting double rod type

● Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Two rods do not require guides. A linear ball bearing maintains high non-rotating accuracy and tip deflection accuracy, even at full stroke.
ATBDA_ALL - Alpha series twin rod cylinders ATBDA series

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Two rods do not require guides. A linear ball bearing maintains high non-rotating accuracy and tip deflection accuracy, even at full stroke.
BC - Double acting type

● Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. A new cylinder with direct mounting for minimal size, minimal weight, and space saving. H1 grease standard compliant. A new lineup of corrosion resistant specifications, scraper specifications, and heat resistance specifications.
BCD - Double acting double rod type

● Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Direct mount, H1 grease standard compliant. A new lineup of corrosion resistant specifications.
BCG - Double acting type with guides

● Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Linear guide equipped without sacrificing space-saving features. High rigidity, compact device unit. A new lineup of corrosion resistant specifications and pin hole specifications.
BCSA - Single acting push out

● Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with direct mounting for minimal size and minimal weight, and integrated return spring. H1 grease standard compliant. A new lineup of corrosion resistant specifications.
BCTA - Single acting pull

● Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with direct mounting for minimal size and minimal weight, and integrated return spring. H1 grease standard compliant. A new lineup of corrosion resistant specifications.
BC_ALL - Basic cylinders

● Φ8 to 40 mm [0.315 to 1.575 in] cylinder bore. A new cylinder with direct mounting for minimal size and minimal weight. Basic cylinders in a wide range of variations that allow creation of just about any type of production process. H1 grease standard compliant.
BDA - Double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.
BDAD - Double acting double rod type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Cylinder with piston rods on both ends of the piston.
BDADL - Non-rotating double acting double rod type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Non-rotating double rod type. Meets a wide variety of high non-rotating accuracy needs. All in a square and compact body.
BDAL - Non-rotating double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Non-rotating type meets a wide variety of high non-rotating accuracy needs. All in a square and compact body.
BDAV_ALL - Vacuum pad equipped multi mount cylinders

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Integration of a vacuum pad and cylinder into a single unit and a hollow shaft structure enables a very small overall length and small operation that fully meets a variety of vacuum system suction and handling, and other needs.
BDA_ALL - Multi mount cylinders BDA series

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Non-rotating type meets a wide variety of high non-rotating accuracy needs.
BSA - Single acting push out type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Single acting type with integrated return spring.
BSAL - Single acting non-rotating push out type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with non-rotating type integrated return spring. Meets a wide variety of high non-rotating accuracy needs. All in a square and compact body.
BTA - Single acting pull

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Single acting type with integrated return spring.
BTAL - Single acting non-rotating pull type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with non-rotating type integrated return spring. Meets a wide variety of high non-rotating accuracy needs. All in a square and compact body.
C1_125_250_375_500 - Check valve

● Female thread connection type check valve
CBDA - Jig cylinder C series: Double acting lateral load resistance type

● Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. This type improves the characteristics of lateral load to the rod. Short, thin body designed for total space saving.
CCDA - Double acting long stroke type

● Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving.
CCDAK - End keep double acting type

● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
CCM_ALL - Cleanliness monitor CC monitor

● Constant monitor checks cleanliness within the work area. Multi-point constant monitoring allows early discover of the causes of contamination.
CDA - Double acting type

● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving.
CDAD - Double acting double rod type

● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving.
CDAL - Square rod double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving.
CDAL_6_8_10 - Non-rotating double acting type

● Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving.
CDAT - Double acting multi position type

● Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving.
CDAW - Dual stroke double acting pull type

● Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.
CDAZ_ALL - Jig cylinder C series low-friction cylinders

● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving.
CDA_ALL - Jig cylinder C series

● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations.
CJ_ALL - Cylinder joint

● Screw sizes M3 to M26. cylinder axis and workpiece axis alignment makes this perfect for parallelism alignment. Dramatically reduces mounting time. Simple exterior design with dust seal.
CLF_ALL - Clean line filter CLF

● Stable filtration performance ensured by dual-layer structure with a PTFE membrane and a PTFE non-woven fabric. 100% filtering efficiency of fine 0.01 μm particles.
CMZ_ALL - CMZ Series

● iB-Cyclone+FRZ Series combination that completely eliminates the drain. The perfect choice to reduce your number of assemblies and space requirements.
CN - Large FRL series: Combinations

● Combination air filter, regulator, and lubricator for high flow rate.
CONNECTORS_ALL - Connector fittings

● Multiple connectors can be freely combined vertically or horizontally using a connector band.
CPDA_ALL - Jig cylinder C series stroke adjustment type

● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear.
CPLG_ALL - Compliance Light θ-free(parallel type)

Absorbs the position error of the X/Y axis
CPLM_ALL - Compliance Light Compact Specifications

Perfect at absorbing errors for small, lightweight parts!
CPL_F - Compliance Light parallel type

● The parallel type corrects positional errors when inserting workpieces and press fitting, and when handling workpieces in the X, Y, and θ axes.
CPL_S - Compliance Light swing type

● The swing type corrects positional errors when inserting workpieces and press fitting, and when handling workpieces in the X, Y, Z, θ, and α axes.
CRE_ALL - Cylinder rod end

● Screw sizes M3 to M26. Compatible with 6 to 100 mm [0.236 to 3.937 in] bore cylinders. A fluoresin liner for a maintenance free no lubrication type.
CS-010_ALL - 010 series (clean equipment)

● Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders.
CS-030_ALL - 030 series (clean equipment)

● A series that applies advanced technology to resolve issues dealing with compact configuration, increased flow volume, and reduces electrical current.
CS-050_ALL - 050 series (clean equipment)

● Poppet type 2?3?5 port solenoid valve, boasting high reliability and durability, for drive control of cylinders with diameters of 6 to 25 mm [0.236 to 0.984 in].
CS-110_ALL - 110 Series (clean equipment)

● A versatile series that meets the needs of operation control of 20 to 40 mm [1.575 to 30150 in] diameter cylinders and a wide range of other applications.
CS-180_ALL - 180 Series (clean equipment)

● A versatile series that meets the needs of operation control of 20 to 80 mm [0.787 to 30150 in] diameter cylinders and a wide range of other applications.
CS-200_ALL - 200 Series (clean equipment)

● 2, 3, or 5-port solenoid valve that is perfect for operation control of 32 to 80 mm [1.260 to 3.150 in] diameter cylinders or as a low-pressure specification actuator.
CS-240_ALL - 240 Series (clean equipment)

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect solenoid valve for operation control of middle-size actuators.
CS-BC - Double acting type basic cylinders (clean equipment)

● Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving.
CS-BCG - Basic cylinders: With guide (clean equipment)

● Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option.
CS-BDA - Double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.
CS-BDAD - Double acting double rod type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.
CS-BDAL - Non-rotating double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.
CS-BDA_ALL - Multi mount cylinders (clean equipment)

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.
CS-CDAZ_ALL - Jig cylinder low-friction specification CDAZ (clean equipment)

● Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation
CS-CDA_ALL - Jig cylinder C series (clean equipment)

● Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs.
CS-DA - Double acting type

● Φ20 to 63 [0.787 to 2.480] cylinder bore. Clean room specification slim cylinder. Double acting type
CS-DAB - Double acting block type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Clean room specification slim cylinder. Double acting type with block.
CS-DABK - Double acting block end keep type

● Φ20 to 40 [0.787 to 1.575] cylinder bore. Clean room specification slim cylinder. Block cylinder end keep, double acting type
CS-DAD - Double acting double rod type

● Φ20 to 40 [0.787 to 1.575] cylinder bore. Clean room specification slim cylinder. Double rod type
CS-DAK - End keep double acting type

● Φ20 to 40 [0.787 to 1.575] cylinder bore. Clean room specification slim cylinder. Double acting type end keep
CS-DA_ALL - Slim cylinders (clean equipment)

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep.
CS-EA10_ALL - EA series (clean equipment)

● 10 mm [0.394 in] valve width, low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available. Perfect for pilot operated valves and cylinder drives up to Φ25 [0.984].
CS-EB10_ALL - EB series (clean equipment)

● 10 mm [0.394 in] valve width, low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available. Perfect for pilot operated valves and cylinder drives up to Φ25 [0.984].
CS-F10_ALL - F Series F10 type (clean equipment)

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Low power consumption. For single and double use. A wide range of possible variations: reducer fitting, etc.
CS-F15_ALL - F Series F15 type (clean equipment)

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Low power consumption. For single and double use. A wide range of possible variations: reducer fitting, etc.
CS-F18_ALL - F Series F18 type (clean equipment)

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Low power consumption. A new type of solenoid valve for single and double use. A wide range of possible variations: reducer fitting, etc.
CS-FR_ALL - Multi series filter regulators (clean equipment)

● 5 μm air filter and regulator incorporated into a compact configuration. Preset marker pressure gauge equipped as standard. Drain cock with fitting or auto drain cock can be selected.
CS-F_ALL - Multi series air filters (clean equipment)

● 5 μm element with little pressure loss. One-touch attachment and detachment, drain cock with fitting, or auto drain cock can be selected as options for the drain bowl.
CS-G010_ALL - G010 series (clean equipment)

● New positive pressure specification and vacuum specification lineup to meet a wide variety of control needs!
CS-JA_ALL - JA series (clean equipment)

● For cylinder bore sizes up to 40 mm [1.575 in]. 10.5 mm [0.413 in] valve width. Thin, compact configuration. Advances the trend towards space-saving machinery and equipment. A tandem three-port valve that provides a high degree of added value.
CS-KSC_ALL - KSC series (clean equipment)

● Clean room suitable simple flow rate adjustment while maintaining stable flow.
CS-KSHC_ALL - KSHC Series (Clean Equipment)

● 0.1μm low particle generation provides cleanliness equivalent to JIS ISO Class 5. (FED-STD Class 100 equivalent), silicon free. Lowers impact value and alleviates impact noise.
CS-MBDA_ALL - Mini bit cylinder MBDA (clean equipment)

● Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)
CS-MF_ALL - Multi series mist filters (clean equipment)

● 0.3 μm element removes dirt and oil. Bowl is one-touch attachable and detachable, and cartridge type element simplifies maintenance.
CS-MGA_ALL - Mini guide slider MGA (clean equipment)

● Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs.
CS-MMF_ALL - Multi series mist micro filters (clean equipment)

● 0.01 μm element removes fine dirt and oil particles. Bowl is one-touch attachable and detachable. Cartridge type element simplifies maintenance.
CS-MRV_ALL - Flat rodless (clean equipment)

● Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation.
CS-NHBDPG_ALL - Parallel type NHBDPG (clean equipment) with linear guide

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification.
CS-PBDA - Double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. A lineup of double acting types and single acting push types.
CS-PBDA_ALL - Pen cylinder PBDA

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. A lineup of double acting types and single acting push types.
CS-PBSA - Single acting push out type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. A lineup of double acting types and single acting push types.
CS-PR_ALL - Multi series precision regulators (clean equipment)

● Compact precision regulator with extremely fine pressure settings at a sensitivity of 0.001 MPa.
CS-QJS_ALL - Speed controller with quick fitting (clean equipment)

● Clean room suitable speed controller with quick fittings for air cylinder speed control.
CS-QJ_SMART - Smart type

● Quick fitting for outstanding operability and durability that provides a more compact configuration while maintaining fitting function. A lineup of smart types.
CS-QJ_STANDARD_ALL - Standard type

● Clean room suitable quick fitting for simple attachment and detachment.
CS-RAP_ALL - Piston type RAP (clean equipment)

● Rack-and-pinion type clean room specification rotary actuator.
CS-R_ALL - Multi series regulators (clean equipment)

● Compact yet with a stable pressure regulator with preset markers included as standard. Select from among standard pressure specification, integrated check mechanism, low-pressure specification.
CS-SCL_ALL - SCL series (clean equipment)

● Clean room suitable fine speed adjustment of the Rc1/8?1/4 port cylinder.
CS-SC_ALL - SC series (clean equipment)

● Clean room suitable fine speed adjustment of the M5?Rc1/8 port cylinder.
CS-SGDAQ_ALL - Jig cylinder with guides (clean equipment)

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability.
CS-SUPPLY_JOINTS_ALL - Supply joint

● Same inner diameter and low volume as steep pipes used for piping, but requiring half the piping space.
CS-TAC_J_ALL - TAC Fittings (Clean Equipment)

● Clean room suitable barbed compact fitting series to support various types of small equipment.
CS-TBDA_ALL - Twin rod cylinders (clean equipment)

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
CS-TDA_ALL - Twin rod cylinder TDA (clean equipment)

● Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder.
CS-TSC0_ALL - TSCO Series (clean equipment)

● Clean room suitable fine speed adjustment of the M3 port cylinder.
CS-TSC_ALL - TSC Series (clean equipment)

● Clean room suitable fine speed adjustment of the M5 port cylinder.
CS-URETHANE_TUBE_ALL - Urethane tubes (clean equipment)

● Small minimum bend radius for outstanding flexibility, plus outstanding weather resistance and oil resistance.
CS2B_3B_4B_5B - CS2B CS3B CS4B CS5B 2-lead wire

● Reed sensor switch
CS2F_3F_4F_5F - CS2F CS3F CS4F CS5F 2-lead wire

● Applicable cylinders: Slim cylinders, dyna cylinders, swing cylinders
CS3H_4H_5H - CS3H CS4H CS5H 2-lead wire

● Applicable cylinders: J Series jig cylinders, slide units, SHM
CS3M_4M_5M - CS3M CS4M CS5M 2-lead wire

● Applicable cylinders: Slim cylinders, twin port cylinders, ORC, ORCA, ORGA, ORK, MRG, swing cylinders, twist cylinders
CS5T_11T - CS5T CS11T 2-lead wire

● Applicable cylinders: Knock cylinders, multi mount cylinders, dyna cylinders, SD cylinders, TDA, ORK, RAP, RAN, swing cylinders　
CSA - Single acting push out type

● Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving.
CSAD - Single acting double rod type

● Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving.
CSAT - Single acting multi position push out type

● Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving.
CSAW - Dual stroke type single acting push type

● Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.
CTA - Single acting pull

● Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving.
CTAW - Dual stroke single acting pull type

● Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.
CY_CZ - Large FRL series: Filter regulator

● Combination air filter, regulator, and lubricator for high flow rate.
DA - Double acting type

● Φ20 to 50 mm [0.787 to 1.969 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders.
DAB - Double acting block type

● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Block type that does not require a mounting bracket. Stainless steel tubing for high quality and high reliability.
DABC - Double acting block with variable cushion type

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Block type that does not require a mounting bracket. An integrated air cushion absorbs impact force at the stroke end.
DABF - Block type heat resistant specification: Double acting type

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Fluorine packing enables operating temperatures up to 130 degrees. However, a sensor switch cannot be equipped.
DABK - Double acting block end keep type

● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
DABL - Double acting block Square rod type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Does not require a mounting bracket. Square rod makes it non-rotating.
DABN - Block type low speed specification: Double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Low-speed type with an operating speed range from 10 mm/s [0.394 in/sec].
DAD - Double acting double rod type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Stainless steel tubing for high quality and high reliability.
DAE_DAP - Double acting pull, push stroke adjustment type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Cylinder with stroke limiting stopper. An adjustable type lineup for both pull side and push side.
DAF - Double acting type heat resistant type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Fluorine packing enables operating temperatures up to 130 degrees. However, a sensor switch cannot be equipped.
DAH - Low hydraulic pressure: Double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
DAK - End keep double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
DAL - Square rod double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod. Stainless steel tubing for high quality and high reliability.
DAN - Double acting low speed type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Low-speed type with an operating speed range from 10 mm/s [0.394 in/sec].
DAR - Double acting brake type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Cylinder with brake mechanism to maintain intermediate stop and position.
DAT - Double acting multi position type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Two cylinders can be linked in series and three stop positions can be specified. Stainless steel tubing for high quality and high reliability.
DAW - Dual stroke double acting pull type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Two cylinders can be combined back-to-back for two operation strokes. Stainless steel tubing for high quality and high reliability.
DAY - With scraper double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Scraper added to the rod packing prevents entry of outside foreign matter for wider ranging application potential in a variety of environments.
DA_ALL - Slim cylinders DA series

● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations.
DDA - Double acting type

● Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders.
DDAD - Double acting double rod type

● Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston.
DDADL - Non-rotating double acting double rod type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston.
DDAE - Double acting pull stroke adjustment type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.
DDAH - Low hydraulic pressure: Double acting type

● Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
DDAK - End keep double acting type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
DDAL - Non-rotating double acting type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod.
DDAP - Double acting push stroke adjustment type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.
DDAR - Double acting brake type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position.
DDAT - Double acting multi position type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified.
DDAW - Dual stroke double acting pull type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes.
DDA_ALL - DYNA cylinders

● Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders.
DDV - Valpack double acting type

● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements.
DF_ALL - Drain filter DF

● A high-performance condensation and separation element provides a fixed separation rate (99%) even in the case of changes in flow rate and flow volume. Almost no element replacement required.
DPT_DPV_ALL - Desktop type compressors

● Air compressor that can used anywhere with ease. Compact design fits into an A4-size installation area. Low noise design (55 dB). Lightweight (4.6 kg [10.141 lb]).
DTHB_DTHKB_ALL - Desktop robot: DTHB series

● A3 or A4 workpiece size unit installation area, enhanced DTRB function, multi-task function, and high-level motion control added.
DTRB_ALL - Desktop robot: DTRB series

● A4-size unit installation area. Compact design is perfect for real cellular manufacturing and other manufacturing environments. A precision slide screw provides high-accuracy operation.
DTRY-ELB_ALL - 1-head, 2-head Type (ELB Series)

● Blow type that enables pinpoint charge removal. Enables never-before-possible ion transport by tubing and metal piping.
DTRY-ELF_ALL - ELF Series

● Integrated compact, high-voltage transformer allows use of a low-voltage DC power supply.
DTRY-ELW_ALL - ELW Series Wide Type

● No air supply required, which enables installation location and application versatility. High-speed charge removal for a wide range of work pieces. CE marking compliant.
DTY-BA11_ALL - BA11 Series

● Improved charge removal performance in a compact configuration. A new lineup of small flow volume type nozzles and silicon charge removal needles. Widths from 350 mm [13.78 in] to 3100 mm [122.047 in] to meet a wide variety of needs.
DTY-BX01_ALL - BX01 Series (High-speed Charge Removal)

● High voltage wiring and controller not required. Combination with a potential sensor provides high-speed charge removal! All-in-one ionizer that is both high-performance and compact.
DTY-ELF_1XHC_ALL - Ionizer Fan Type Multi Function Type DTY-ELF14HC

Excellent ion balance with self-cleaning function
DTY-ELF_1XH_ALL - IonIzier Fan Type High Performance Type DTY-ELF13H,14H

High-performance types have excellent long-term stability
DTY-ELF_1X_ALL - Ionizer Fan Type Simple Type DTY-ELF13,14

Basic Fan Type
DTY-ELG21_ALL - Ionizer gun type DTY-ELG21

● This is the successor model of ELG11. The weight is reduced by 20% from the
ELG11, and the work efficiency is improved. Also by connecting to the separately sold Pulse Blow Unit, it is possible to improve energy saving and dust removal efficiency.
DTY-ELG31_ALL - Ionizer gun type DTY-ELG31

Light weight,140g.Lightning LED equipped
DTY-ELG41_ALL - Ionizer gun type DTY-ELG41

Change the shape and handling, to support various situations!
DTY-ELK01 - Standard type (ELK series)

● High frequency AC type enables outstanding ion balance and a wide array of nozzle types that enable charge removal ranging from pinpoint to wide area workpieces. Simple charge removal needle detachment and attachment, and maintenance. CE marking compliant.
DTY-ELK01-L - Low dust emission type (ELK series)

● A specification in which the charge removal needle employs special alloys dramatically reduces dust generation. Perfect for use in clean environments. Simple charge removal needle unit connection and disconnection. CE marking compliant.
DTY-ELK01-S - Air saving type (ELK series)

● Air saving type sucks in outside air for blowing, which reduces air consumption. High frequency AC type enables charge removal ranging from pinpoint to wide area workpiece. Simple charge removal needle connection and disconnection. CE marking compliant.
DTY-EPS01_ALL - DTY-EPS01 Series

● Introducing small sensors perfect for monitoring static electricity in-line.These sensors can constantly monitor and measure the static electricity on assembly lines,which would be difficult with handheld measuring devices.
DTY-FA_ALL - FA Series Wide area type

● Can eliminate static charge over an extensive range. Air supply is not required, and two types can be chosen depending on the installation location and application.
DTY-HA_ALL - HA Series Over head type

● Overhead fan type ionizer for which air supply is not required. Can eliminate static charge over an extensive range.
DTY-KVS11_ALL - DTY-KVS11 Series (Handy Type)

● The handy surface potential meter is a portable digital display measurement instrument that measures the surface potential of charged objects without contacting them. Perfect for day-by-day static electricity management.
DTY-WB_ALL - Separate type

● Ion wiper's charge removal and dust removal functions and dust collection
function split into modules. Charge removal, dust removal, and dust collection units can flexibly handle various needs and a wide range of workpiece sizes.
DTY-WC-L - A3 size

● Ion Wiper combines a high-frequency AC ionizer with an air curtain to maintain workplace cleanliness, while providing efficient charge removal, dust removal, and dust collection, all within a single unit box.
DTY-WC-S - A4 size

● Ion Wiper combines a high-frequency AC ionizer with an air curtain to maintain workplace cleanliness, while providing efficient charge removal, dust removal, and dust collection, all within a single unit box.
DV - Valpack double acting type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements.
EA_ALL - Solenoid valve EA series

● For cylinder bore sizes up to 25 mm [0.984 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control.
EB_ALL - Solenoid valve EB series

● For cylinder bore sizes up to 25 mm [0.984 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control.
EF_ALL - Exhaust filters

● Compact type that offers outstanding silencing and less exhaust back pressure. Also inhibits invasion of foreign matter via the exhaust port. Oil removal from exhaust and lower noise. Clean operation promotes a clean environment.
EMJ_ALL - Electric Auto Hand Changer

Contributes to carbon neutrality!
EP_ALL - Explosion-proof solenoid valve EP series

● Solenoid valve with explosion proof structure, for safety and reliability. Original poppet system virtually eliminates air leaks.
ETR010 - ETR010

● Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding, and meets the needs of simple air quality management and reliability, and long life.
ETR200 - ETR200

● Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding, and meets the needs of simple air quality management and reliability, and long life.
ETR600 - ETR600

● Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding, and meets the needs of simple air quality management and reliability, and long life.
ETR601 - ETR601

● Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding, and meets the needs of simple air quality management and reliability, and long life.
ETR_ALL - Electro-Pneumatic Transducing Regulator ETR Series

● Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding. Supports easy air quality management and reliability, and long life.
EVP_ALL - Vacuum Pump Unit

Contributes to carbon neutrality!
EW2G_ALL - Low Profile Electric Slider

Compact DC brushless motor combined with Koganei's highly reliable Mini Guide Slider series.
EW2H_ALL - Electric Hand Flat Type

The best Low-profile design in the industry! Lightweight,compact
EWHA_A_H - Electric hand actuator

● Additional gripping force variations for improved ease of use. Variable speed control enables a soft touch. Linear guide for high accuracy and high rigidity. Numerical control enables stroke setting as the desired level (64 points).
EWHRT - Electric rotary actuator

● Table type rotary actuator in a more compact size that makes it easier to use. Hollow shaft used for wiring and piping. Configurable swing angle setting (64 points). Shockless start and stop. Configurable acceleration and deceleration settings.
EWM5 - Electric NS slider actuator

● Compact, thin square form actuator. Long table that is perfect for pressing control.
F10 - F10 Single Valve Unit

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Low power consumption. A new type of solenoid valve for single and double use. A wide range of possible variations: reducer fitting, etc.
F10M_AJ_AM_AL - F10 Monoblock Manifold Base Piping

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Output block is switched with the valve side to allow use as direct piping.
F10M_AJ_AM_AL_WIRING - F10 Monoblock Manifold Wire Saving Base Piping Type

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Wiring specifications provided include flat cable connector type and D-sub connector type.
F10M_AP - F10 Monoblock PC Board Manifold Base Piping Type

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. MIL type 20-pin flat cable provides both wire saving and good cost performance.
F10M_F - F10 Monoblock Manifold Direct Piping

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Direct piping type manifold for outstanding cost performance.
F10M_FP - F10 Monoblock PC Board Manifold Direct Piping

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. MIL type 20-pin flat cable provides both wire saving and good cost performance.
F10M_F_WIRING - F10 Monoblock Manifold Wire Saving Direct Piping

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Wiring specifications provided include flat cable connector type and D-sub connector type.
F10M_N - F10 Split Manifold Non-plugin Type

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Simple manifold increase or decrease. Variable number of units provides flexibility.
F10M_P - F10 Split Manifold Type Plugin Type

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease.
F10M_S - F10 Split Serial Transmission Manifold Type

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Serial transmission compatible manifold. Selectable wiring position (transmission block): left or right.
F10M_XN - F10 valve Easy Assembly Type Manifold Non-plug in Type

・For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases.
F10M_XP - F10 valve Easy Assembly Type Manifold Plug in Type

・For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases.
F10M_XS - F10 valve Easy Assembly Type Manifold Serial Transmission Type

・For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases. Serial transmission compatible manifold.
F10_V - Solenoid valve F10 series (vacuum)

● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Low power consumption. For single and double use. A wide range of possible variations: reducer fitting, etc.
F15 - F15 Single Valve Unit

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Low power consumption. A new type of solenoid valve for single and double use. A wide range of possible variations: reducer fitting, etc.
F15M_AJ_AM_AL - F15 Monoblock Manifold Base Piping

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Output block is switched with the valve side to allow use as direct piping.
F15M_AJ_AM_AL_WIRING - F15 Monoblock Manifold Wire Saving Base Piping Type

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Wiring specifications provided include flat cable connector type and D-sub connector type.
F15M_AP - F15 Monoblock Base Piping PC Board Manifold

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. MIL type 20-pin flat cable provides both wire saving and good cost performance.
F15M_F - F15 Monoblock Manifold Direct Piping

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Direct piping type manifold for outstanding cost performance.
F15M_FP - F15 Monoblock PC Board Manifold Direct Piping

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. MIL type 20-pin flat cable provides both wire saving and good cost performance.
F15M_F_WIRING - F15 Monoblock Manifold Wire Saving Direct Piping

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Wiring specifications provided include flat cable connector type and D-sub connector type.
F15M_N - F15 Split Manifold Non-plugin Type

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Simple manifold increase or decrease. Variable number of units provides flexibility.
F15M_P - F15 Split Manifold Type Plugin Type

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease.
F15M_S - F15 Split Serial Transmission Manifold Type

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Serial transmission compatible manifold. Selectable wiring position (transmission block): left or right.
F15M_XN - F15 valve Easy Assembly Type Manifold Non-plug in Type

・For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases.
F15M_XP - F15 valve Easy Assembly Type Manifold Plug in Type

・For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases.
F15M_XS - F15 valve Easy Assembly Type Manifold Serial Transmission Type

・For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width.This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases. Serial transmission compatible manifold.
F15_V - Solenoid valve F15 series (vacuum)

● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width. Low power consumption. For single and double use. A wide range of possible variations: reducer fitting, etc.
F18 - F18 Single Valve Unit

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Low power consumption. A new type of solenoid valve for single and double use. A wide range of possible variations: reducer fitting, etc.
F18M_A - F18 Monoblock Manifold Base Piping

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Output block is switched with the valve side to allow use as direct piping.
F18M_F - F18 Monoblock Manifold Direct Piping

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Direct piping type manifold for outstanding cost performance.
F18M_N - F18 Split Manifold Non-plugin Type

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Simple manifold increase or decrease. Variable number of units provides flexibility.
F18M_P - F18 Split Manifold Type Plugin Type

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease.
F18M_S - F18 Split Serial Transmission Manifold Type

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Serial transmission compatible manifold. Selectable wiring position (transmission block): left or right.
F18_V - Solenoid valve F18 series (vacuum)

● For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. 18 mm [0.709 in] valve width. Low power consumption. For single and double use. A wide range of possible variations: reducer fitting, etc.
FDH_ALL - Tube dryer FDH

● A hollow membrane is used to dehumidify compressed air. No power supply is required and the dew point is indicated in real time by changes in color. Removed moisture is exhausted as water vapor, so drain water is not generated.
FMA_ALL - PC wiring system

● Wire saving equivalent to a serial transmission system can be achieved by using a special cable to disconnect at the desired location and batch pressure connect. Support as-is connection of commercially available relay terminals and other equipment.
FME_ALL - Micro ejector FME series

● Energy saving and silent micro ejector. World-class level low noise (when low-noise type muffler is used), 20% lower air consumption (compared with past Koganei models). Low pressure specification lineup also available.
FN - Large FRL series: Air filter

● High capacity filter with a process flow rate of 3000 ?/min or 6000 ?/min.
FNZ - FRZ Series Air Filters FNZ (Rc thread)

● (Rc thread) A lineup for filtered particle sizes of 5 μm and 40 μm. The filter element condition can be inspected visually, making it easier to see when maintenance is required.
FNZ_NPT - FRZ Series Air Filters FNZ (NPT thread)

● (NPT thread) A lineup for filtered particle sizes of 5 μm and 40 μm. The filter element condition can be inspected visually, making it easier to see when maintenance is required.
FN_MINI - Small FR series: Air filters

● Compact, lightweight air filter. Quick fitting for simple tube connection to the device.
FOOT_OPERASTION_4F_4 - Foot valve 250F series 5-port

● Retention mechanism can maintain operation, which is canceled by pressing the latch at the back of the pedal with your foot.
FOOT_OPERASTION_F_FL - Foot valve 250F series 2-, 3-port

● Retention mechanism can maintain operation, which is canceled by pressing the latch at the back of the pedal with your foot.
FRL_C_ALL - Multi series: Combinations

● A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator.
FRN - Small FR series: Filter regulators

● Compact, lightweight filter regulator. Quick fitting for simple tube connection to the device.
FRZ - FRZ Filter Regulators (Rc thread , Mpa Gauge)

● (Rc thread , Mpa Gauge) New-generation filter regulator. Perfect on lines following the removal of moisture and fluids. Elimination of fluid removal function for greater mounting direction freedom. Easy bowl attachment and detachment.
FRZB_ALL - FRZB Filter Regulators (Rc thread , Mpa Gauge)

● (Rc thread , Mpa Gauge) Filter regulator with simple moisture and fluid removal functions in a compact design. Improved flow volume characteristics allow a more compact configuration. Improved bowl attachment and detachment work.
FRZB_ALL_NPT - FRZB Filter Regulators (NPT thread , psi Gauge)

● (NPT thread , psi Gauge) Filter regulator with simple moisture and fluid removal functions in a compact design. Improved flow volume characteristics allow a more compact configuration. Improved bowl attachment and detachment work.
FRZ_NPT - FRZ Filter Regulators (NPT thread , psi Gauge)

● (NPT thread , psi Gauge) New-generation filter regulator. Perfect on lines following the removal of moisture and fluids. Elimination of fluid removal function for greater mounting direction freedom. Easy bowl attachment and detachment.
FR_ALL - Multi series: Filter regulators

● 5 μm air filter and regulator incorporated into a compact configuration. Preset marker pressure gauge equipped as standard. Drain cock with fitting or auto drain cock can be selected.
FS1U_ALL - Separate type 1-channel flow rate sensor controller FS1U

● Enables the same ease of use as a pressure switch. Two-color indicator for at-a-glance check of workpiece suction. Flow volume sensor detects workpiece suction that cannot be detected by a pressure sensor.
FSU_ALL - Separate type multi-channel flow rate sensor controller FSU

● Pressure sensor detects workpiece suction that cannot be detected by a pressure sensor. Four-point simultaneous detection by a single controller. Computer connectability. Four micro-pressure compatible type modes.
FVA_ALL - FVA Series hand valves with quick fitting

● Hand valve for switching the flow path partway along piping. 3-way valves and 2-way valves are also available.
F_ALL - Multi series: Air filters

● 5 μm element with little pressure loss. One-touch attachment and detachment, drain cock with fitting, or auto drain cock can be selected as options for the drain bowl.
F_SERIES_ALL - Solenoid valve F10 series

● Solenoid valve F10 Series for cylinder bore sizes of 20 to 50 mm [0.787 to 1.969 in]. 10 mm [0.394 in] valve width. World's first valve to be equipped with reducer size fitting. A wide range of manifold specifications to meet user needs.
G010_ALL - Solenoid valve G010 series (for 2, 3 ports)

● New positive pressure specification and vacuum specification lineup to meet a wide variety of control needs!
G1-18D - Pressure gauges for small FR series

● Pressure gauge for compact FR Series.
G1-20_ALL - Small pressure gauge G1-20

● Compact pressure gauge with external dimension of 20 mm [0.787 in].
G1-40_ALL - Pressure gauge G1-40

● Compact pressure gauge with external dimension of 40 mm [1.575 in]. With a mechanism that prevents the pressure gauge from falling from the case.
G1S_G3S - Pressure gauge for precision stainless steel regulator

● Gas pressure gauge, standard pressure specification, and low pressure specification are available.
G3P-40_ALL - Small precision pressure gauge G3P-40

● Compact configuration while maintaining pressure indication precision full scale ±1%. Mechanical life of 200,000 cycles during FS operation. (Integrated throttle valve)
GP1-40_ALL - Panel mount pressure gauge GP1-40

● Pressure gauge with external dimension of 40 mm [1.575 in]. Compact with panel mount, and a mechanism that prevents the pressure gauge from falling from the case. Standard pressure specification and low pressure specification available.
GS1-50_ALL - GS1-50 pressure gauge with built-in switches (mechanical)

● Set pressure and working pressure displayed by a single pressure gauge. Panel mounting is also supported for easy centralized control and management from the control panel.
GS6_ALL - Digital pressure switchs,GS6

● Small pressure switch with outstanding reliability and response for vacuum and positive pressure. Two-screen, three-color indications for easy operation.
GV-40_ALL - Vacuum gauge GV-40

● 40 mm [1.575 in] outside diameter vacuum pressure gauge. Panel mount can be selected which is convenient for incorporating into a device.
H1_MRB - Food equipment H1grease specification

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications.
H1_ORB - Food equipment H1grease specification

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications.
HC_ALL - Hydro-checks HC

● Seamless hydraulic control of cylinder speed from high speed to low. Maintenance free and totally sealed to eliminate oil leaks. Enables simple speed adjustment and stable speed control.
HR_ALL - High-relief regulators

● Instant response, even when there change in the secondary side pressure is great. Uses an air pilot system.
HV_ALL - High cycle solenoid valves

● Long 500 million cycle life. High-frequency, high-durability 1500 cycles per minute. Simple poppet type construction ensures high reliability even under high-frequency operation.
IBCY_ALL - iB-Cyclone (Rc thread , Cycline type water separator)

● (Rc thread) High-speed cyclone system (patent pending): Refined centrifuge know-how. Half the volume ratio of equivalent equipment, with a moisture separation rate of at least 99%. (Koganei measurement standards) No element makes it maintenance free.
IBCY_ALL_G - iB-Cyclone (G thread , Cycline type water separator)

● (G thread) High-speed cyclone system (patent pending): Refined centrifuge know-how. Half the volume ratio of equivalent equipment, with a moisture separation rate of at least 99%. (Koganei measurement standards) No element makes it maintenance free.
IBCY_ALL_NPT - iB-Cyclone (NPT thread , Cycline type water separator)

● (NPT thread) High-speed cyclone system (patent pending): Refined centrifuge know-how. Half the volume ratio of equivalent equipment, with a moisture separation rate of at least 99%. (Koganei measurement standards) No element makes it maintenance free.
IBFL_ALL - iB-Flow

● Enables small bore cylinder speed control and low-speed range control. Precision digital control of micro flow volume from a remote location. Good for such applications as air-operated valve open/close speed control. Measurement and visible representation of cylinder operating time.
IBFL_BC - iB-Flow Flow Selector

● Remote control of the needle opening that controls flow volume, which multiple switching variations! Flow volume feedback and various combinations for stabilization of flow volume setting.
IBM_ALL - iB-Move

● Simple operation: Simple operation between two points. Easy stroke, speed, acceleration/deceleration, thrust level settings. Open loop control for lower cost. No linear motor and low-speed mechanism for extremely quiet operation.
IB_ZERO - Solenoid valve iB-ZERO(5-ports)

● corresponding to cylinder diameter of 80mm[3.150in]. 5 port manifold solenoid valve , the adoption of the world's first all- resin integrally molded body . Easy assembly of the manifold . Thin and lightweight type . Outstanding cost performance .
JA_ALL - Solenoid valve JA series

● For cylinder bore sizes up to 40 mm [1.575 in]. 10.5 mm [0.413 in] valve width. Thin, compact configuration. Advances the trend towards space-saving machinery and equipment. A tandem three-port valve that provides a high degree of added value.
JC_ALL - Solenoid valve JC series

● For cylinder bore sizes up to 40 mm [1.575 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control.
JE_ALL - Solenoid valve JE series

● For cylinder bore sizes up to 80 mm [3.15 in]. 12 mm [0.472 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control.
K2 - High speed, 2-port valves K2

● World's first! New solenoid technology. Compact high-speed response 0.4 to 3 ms (when ON), large flow volume 55 to 160 l/min [1.9426 to 5.6512 ft2/min] (when 0.4 MPa [58 psi]). Protective structure that complies with IP67 for compatibility in a wide range of environments
K2_ALL - High-speed valve K series

● World's first! Uses new solenoid technology. 2-port, 3-port, 5-port lineup. Compact, high-speed response, large flow volume. With power saving circuit at 9 W and above and a protective structure that complies with IP67 for compatibility in a wide range of environments
K3_K4 - High-speed 3-, 4-port valves K3, K4

● Low power with the world's fastest response. Compact configuration and high-speed response of 1.2 to 4 ms (when ON), which is perfect for high-speed vacuum suction transport. Supports both vacuum and positive pressure. Protective structure IP67 compliant.
KAE_ALL - Cool separator KAE

● World's first pressure differential type for a lightweight and compact configuration. Great dehumidification performance, even during flow volume and pressure fluctuation. Auto draining provided by auto train trap.
KBSD - Double acting type: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong double acting type cylinder that meets JIS standards.
KBSDD - Double rod type: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston.
KBSDE - Pull stroke adjustment type: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper.
KBSDH - Low hydraulic pressure: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
KBSDP - Push stroke adjustment type: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper.
KBSDT - Multi position: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified.
KBSDW - Dual stroke type: Aluminum tubing

● Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes.
KBSD_KCSD_ALL - KSD cylinder

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. A lineup of a wide range of variations and choice of aluminum or iron main unit tubing.
KCSD - Double acting type: Steel tubing

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Double acting type, steel tube specification.
KCSDD - Double rod type: Steel tubing

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston.
KCSDE - Pull stroke adjustment type: Steel tubing

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper.
KCSDH - Low hydraulic pressure: Steel tubing

● Φ180 to 250 mm [7.087 to 9.843 in] cylinder bore. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
KCSDP - Push stroke adjustment type: Steel tubing

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper.
KCSDT - Multi position: Steel tubing

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified.
KCSDW - Dual stroke type: Steel tubing

● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes.
KDV_ALL - High-speed Valpack cylinders

● High-speed cylinder with integrated solenoid valve. 100 Hz maximum operating frequency. Perfect for removal of heavy defective products, etc.
KFPC1 - Controller for KFPV

● Initialization without external input. (With initial setting support circuit) Compatible with proportional control valves KFPV050, 300 Series.
KFPV010_ALL - Proportional Control Valve KFPV010 Series

Supports control at extremely low flow rates
KFPV050 - KFPV050

● Perfect for seamless control of gasses and liquids. High accuracy (repeat accuracy, response accuracy, low hysteresis). This proportional control valve requires a special controller.
KFPV300 - KFPV300

● Perfect for seamless control of gasses and liquids. High accuracy (repeat accuracy, response accuracy, low hysteresis). This proportional control valve requires a special controller.
KFPV_ALL - Proportional control valve KFPV

● Perfect for seamless control of gasses and liquids. High accuracy (repeat accuracy, response accuracy, low hysteresis). A lineup of two sizes for different flow volumes.
KIS_ALL - Air indicators KIS

● Whether or not air is present in the line and equipment operation status is indicated by colors. Clear color switching for indicators for outstanding readability.
KKF_ALL - Activated charcoal filter KKF

● Odors removed by being absorbed by activated charcoal. Before and after micro mist filters remove odors caused by oil paper and other factors to keep air fresh.
KLF_ALL - Line filter KLF

● Extremely low pressure loss pleated filter removes solids 1μm or greater in size. Longer air dryer and micro mist filter life.
KMC_ALL - Plunger type mechanical valve, micro valve series

● Little change in operating force from low to high working pressure, and no neutral position for smooth A port and R port switching.
KMF_ALL - Micro mist filter KMF

● Removal of solids 0.01 μm and greater, and residual oil up to 0.01 wt ppm. Installation at an inlet port where oil must not enter or somewhere past the air dryer removes oil and fine particles.
KM_METAL_ALL - Muffler KM series (brass)

● Compact type that offers outstanding silencing and less exhaust back pressure. Also inhibits invasion of foreign matter via the exhaust port.
KM_PLASTIC_ALL - Muffler KM series (plastic)

● Compact type that offers outstanding silencing and less exhaust back pressure. Also inhibits invasion of foreign matter via the exhaust port.
KPJ - Vacuum pads: Bellows type

● 10 mm [0.394 in], 15 mm [0.591 in], 20 mm [0.787 in] size diameter lineup. Bellows type that is perfect a workpiece with a slanted suction surface or when there are level differences in the workpiece.
KPT_ALL - Vacuum Pad KPT Series

Handles workpieces with no damage
KP_ALL - Vacuum pads

● Perfect for small, lightweight transport systems. Outstanding reliability with no suction errors. Conductive vacuum pads and halogen process vacuum pads also available.
KRJ_EPS_ALL - Robot Joint EPSON Robot Compatible

Specialized robot joint for EPSON Robot!
KRJ_IAI_ALL - Robot Joint IAI Robot Compatible

Specialized robot joint for IAI Robot!
KRM_ALL - Membrane air dryer KRM

● A CFC-free air drawer with a hollow membrane. No power supply required. Removed moisture is exhausted as water vapor, so drain water is not generated.
KSC_ALL - KSC series

● Simple flow rate adjustment while maintaining stable flow.
KSH - Single orifice type KSH

● Single orifice type. Perfect for low-speed impact.
KSHAH_ALL - KSHAH for handling module SHM

● Absorber for the Systematic Handling Module SHM Series.
KSHAR_ALL - Piston type table type KSHAR for RAT

● Absorber with RAT rotary actuator
KSHAX_ALL - KSHAX for Axis cylinder

● Absorber with AXIS cylinder.
KSHA_ALL - Fixed orifice type KSHA

● Effective shock and noise absorption, shorter cycle time, damage prevention, improved processing accuracy. Fixed absorbing capacity, linear orifice type
KSHDM - KSHADM for Magnet type rodless MRG

● Absorber with MRG magnet type rodless cylinder
KSHE - Multi orifice adjustment type KSHE

● Effective shock and noise absorption, shorter cycle time, damage prevention, improved processing accuracy. Multi orifice type. Self-correction type that is perfect for the impact end during high-speed operation.
KSHES_ALL - Multi orifice adjustment type with sensor KSHES

● Multi orifice type with sensor switches. Simultaneously performs total impact cushioning along with position detection.
KSHJ_ALL - Linear orifice type KSHJ

● Outstanding suction provided by an original linear orifice structure. A wealth of variations with a total of 18 series and 132 types. Support from gram units to ton units.
KSHK_ALL - Linear orifice pressure resistant type KSHK

● Linear orifice type pressure resistant type. Can be used by insertion into a pressurized cylinder.
KSHP_ALL - Linear orifice adjustment type KSHP

● The first linear orifice type with adjustment capabilities. Allows fine adjustment to suit impact speed and load. Maximum number of operations: more than 3 million. Compliant to H1 standards for food equipment specifications.
KSHW - Linear orifice type KSHW

KSHW can solve problems by absorbing impact in bad environments,such as cutting oil, water, or dust.
KSHY - Linear orifice type KSHY

Ideal for shock absorption of oil, dust and other adverse environments. Absorber body stainless steel specification, packing fluoro rubber, foreign substance intrusion prevention filter built-in.
LN - Large FRL series: Lubricators

● Large FRL Series lubricator, constant and stable oil supply even when flow volume and pressure change. Dial with scale for simple drip adjustment and dependable oil supply, even in the case of long piping.
L_ALL - Multi series: Lubricators

● Constant and stable oil supply even when flow volume and pressure change. Dial with scale for simple drip adjustment. Micro lubricator ensures dependable oil supply even in the case of long piping.
MACHINE_OP_B - Ball cam type mechanical valve 125B series

● Main valve can be switched by external ball cam operation. Nut can be used for compact mounting on a panel.
MACHINE_OP_M_C - Roller cam type mechanical valve 250C series

● Sturdy design prevents violent movement and enables smooth pilot air switching.
MANUAL_OP_4H - Manual mechanical valves 250 series

● Double acting air cylinder operation and exhaust center specification, so the air cylinder enters a free state in the center position, which allows it to be moved by hand.
MANUAL_OP_P_HO - Manual mechanical valves (pushbutton type) 125, 250, 2503 series

● Push button manual mechanical value with a compact design that attaches the body to the panel using nuts. A type that maintains the depressed button state is also available.
MANUAL_OP_V - Manual mechanical valves (lever type) 125, 250, 2503 series

● Lever type manual mechanical value with a compact design that attaches the to the main unit panel using nuts. Lever remains in the lowered position on its own.
MBDA - Double acting type

● Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)
MBDA_ALL - Mini bit cylinders MBDA series

● Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)
MBSA - Single acting push out type

● Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Single acting type with integrated return spring.
ME03_05_07_ALL - Micro ejector ME series

● Simple vacuum generating device that uses compressed air for high-speed transport that does not damage the workpiece. Compact configuration, can also be mounted on moving parts.
ME12_25_60_ALL - Micro ejector ME series (integrated type)

● Simple vacuum generating device that uses compressed air for high-speed transport that does not damage the workpiece. Compact configuration, can also be mounted on moving parts.
MEDT_ALL - Micro ejector MEDT series (multistage type)

● MEDT Series with two-level nozzle construction for approximately twice the suction flow rate with the same nozzle diameter.
MED_ALL - Micro ejector MED series (multistage type)

● MED Series with two-level nozzle construction for approximately twice the suction flow rate with the same nozzle diameter.
MF800_1000 - Large FRL series mist filters

● Large FRL Series mist filter. 0.3 μm element removes dirt and oil. Cartridge type element simplifies maintenance.
MFZ - FRZ Series Oil Mist Filters MFZ (Rc thread)

● (Rc thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required.
MFZ_NPT - FRZ Series Oil Mist Filters MFZ (NPT thread)

● (NPT thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required.
MF_ALL - Multi series: Mist filters

● 0.3 μm element removes dirt and oil. Bowl is one-touch attachable and detachable, and cartridge type element simplifies maintenance.
MGA - Double acting type

● Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom.
MGAE - Double acting type with output side and input side stroke adjustments

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup.
MGAEG - Double acting type with output side and input side stroke adjustment buffers

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end.
MGAG - Double acting type with buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end.
MGAGH - Back side piping specification with buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.
MGAGK - Double acting type with buffer and end keep

● Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.
MGAH - Back side piping specification

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available.
MGAK - Double acting type with end keep

● Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
MGAL - Side mounted double acting type

● Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping.
MGALG - Double acting type with side-mounted buffer

● Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer.
MGAP - Double acting type with stroke adjustment buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup.
MGAPG - Double acting type with output side stroke adjustment buffer

● Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end.
MGA_ALL - Mini guide sliders MGA series

● Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom.
MGT_ALL - Mini Guide Table MGT series

● Integration of compact, high-precision, high rigidity table, guide, and cylinder. Uses a 4-point contact linear guide. Metal stopper equipped as standard, shock absorber also equipped.
MJC_ALL - Auto Hand Changer MJC Series

Lightest in the world.Ideal for tool change of robot tip.D-sub and various connectors can be selected.
MMF600_800 - Large FRL series micro mist filters

● Large FRL Series micro mist filter. 0.01 μm element removes fine dirt and oil particles. Cartridge type element simplifies maintenance.
MMFZ - FRZ Series Micro Oil Mist Filters MMFZ (Rc thread)

● (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required.
MMFZ_NPT - FRZ Series Micro Oil Mist Filters MMFZ (NPT thread)

● (NPT thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required.
MMF_ALL - Multi series: Micro mist micro filters

● 0.01 μm element removes fine dirt and oil particles. Bowl is one-touch attachable and detachable. Cartridge type element simplifies maintenance.
MP - Versatile Dispensing Pump

● A new type of dispenser. A simple structure allows dispensing to be enabled by supplying compressed air to a syringe. The dispenser also enables outstanding quantity control.
MRB - Standard specifications

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications.
MRB_ALL - Guide integrated magnet type MRB (Rodless cylinder)

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications.
MRC_ALL - Magnet type MRC (Rodless cylinder)

● Φ6 to 32 mm [0.236 to 1.260 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured.
MRG_ALL - Magnet type with guide MRG (Rodless cylinder)

● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured.
MRS_ALL - Magnet type with linear guide MRS (Rodless cylinder)

● Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Magnet type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard.
MRV_ALL - Magnet type flat rodless MRV (Rodless cylinder)

● Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Unique oval barrel design enables low speed performance impossible before now.
MRW_ALL - Magnet type with linear guide MRW (Rodless cylinder)

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity magnet type with two linear guides. Shock absorber unit equipped as standard.
MR_ALL - Manifold regulators

● Single location checking and adjustment of supply air to multiple lines. In addition to a new binary relief type, the flexibility to meet a variety of different needs.
MSU_ALL - Multi-Channel Sensor Controller MSU Series

・1 Controller centrally manages any 4 sensors with outputs of 1 to 5V.
MTV - Water removal valves

● A new countermeasure against condensation in compact cylinders, etc.! Simply insert into piping for an easy condensation countermeasure.
MV030_090 - MV030・MV090 Type

● Pressure sensors, vacuum destruction air specific ports and other options added. Perfect for vacuum control of a suction transport system using a vacuum pump. Electronic vacuum switch with easy-to-view LED.
MV180 - MV180 Type

● Pressure sensors, vacuum destruction air specific ports and other options added. Perfect for vacuum control of a suction transport system using a vacuum pump. Electronic vacuum switch with easy-to-view LED.
MV_ALL - Vacuum valve unit

● Perfect for vacuum control of a suction transport system with a vacuum pump. Electronic vacuum switch with easy-to-view LED. Dependable control of vacuum line ON/OFF.
NCT_ALL - Non contact transport equipment

● Non-contact, which avoids denting of and damage to workpieces by the pad. Can also hold porous workpieces and workpieces with some unevenness.
NDA - Double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device.
NDA_ALL - Knock cylinders NDA series

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device.
NHBDP - Double acting type

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBDPA - Double acting type

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBDPA_ALL - Parallel type with cross roller bearing NHBDPA

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Finger type with dust cover. Cross roller for high rigidity. Perfect for chucking and handling.
NHBDPG - Double acting type

● Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDPGJ - Double acting type

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDPGJ_ALL - Parallel type NHBDPGJ with linear guide

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type with dust cover. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDPGL_ALL - Parallel type NHBDPGL with linear guide

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDPGY - Double acting type

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDPGY_ALL - Parallel type NHBDPGY with linear guide

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type with linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDPG_ALL - Parallel type NHBDPG with linear guide

● Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBDP_ALL - Parallel type NHBDP

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBDS - Double acting type

● Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBDSLG_ALL - 180-degree open/close type with guides NHBDSLG

● Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. 180 degree open/close type. Employs a thrust bearing for high accuracy and high rigidity. Perfect for workpiece escape.
NHBDSL_ALL - 180 Degree Open/Close Type NHBDSL

● Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. 180 degree finger type. Perfect for chucking and handling.
NHBDS_ALL - Swing type NHBDS

● Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBMP - Single acting normally closed

● Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Parallel type.
NHBMPG_ALL - Mechanical drive hand with linear guide

● Equipped with linear guide and can be opened and closed by external operation. Mechanical hand that does not require air piping.
NHBMP_ALL - Parallel type mechanical hands

● Opening and closing by external operation supported. Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.)
NHBMRP - Single acting normally open

● Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Two types: parallel type and parallel type linear guide specification.
NHBRP - Single acting normally open

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBRPA - Single acting normally open

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHBRPG - Single acting normally open

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBRPGJ - Single acting normally open

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBRPGY - Single acting normally open

● Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.
NHBRS - Single acting normally open

● Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
NHC1D_ALL - Parallel type Air Hand NHC1 Series

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models.
NHE1 - Air drive double acting type

● Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc.
NHE2 - Mechanical drive normally close single acting type

● Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc.
NHE_ALL - 3-finger hand with linear guide

● Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger mechanical hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc.
NHL1D_ALL - L hand with linear guide

● Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. With linear guide and cam drive for finger operation that is perpendicular to the cylinder operation axis. Twice the gripping power of previous models.
NSA - Single acting push out type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with integrated return spring. Integrated spanner flats enable secure mounting.
NVR200_ALL - Vacuum regulator NVR (pilot type)

● Vacuum type pilot system for outstanding pressure stability that stands up to flow volume changes. External pilot type also available.
NYLON_TUBE_ALL - Nylon tubes

● Outstanding friction resistance, bending fatigue resistance, cold resistance, and weather resistance.
NYLON_TUBE_SOFT_ALL - Soft nylon tube

● Nylon tubing with outstanding water resistance, weather resistance, and dimensional stability, that is also flexible.
ORB_ALL - Standard specifications

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving.
ORC10_ALL - Slit type ORC10 (Rodless cylinder)

● Φ10 mm [0.394 in] cylinder bore size. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide.
ORC63_80_ALL - Slit type ORC63, 80 (Rodless cylinder)

● Φ63 to 80 mm [2.480 to 3.150 in] cylinder bore. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide.
ORCA_ALL - Slit type ORCA (Rodless cylinder)

● Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility.
ORGA_ALL - Slit type with guide ORGA (Rodless cylinder)

● Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility.
ORK_ALL - Slit type with cam follower guide ORK (Rodless cylinder)

● Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Smooth operation of the rolling bearing of the cam follower guide. Wide rail maintains high accuracy over the long term.
ORS_ALL - Slit type with linear guide ORS (Rodless cylinder)

● Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Slit type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard.
ORV_ALL - Slit type ORV (Rodless cylinder)

● Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Original flat piston mechanism set a new low cost, short, and thin standard for rodless pistons. Combination with the linear guide enables a low center of gravity and smooth operation.
ORW_ALL - Slit type with linear guide ORW (Rodless cylinder)

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity slit type with two linear guides. Shock absorber unit equipped as standard.
PAG_ALL - Pulse blow air gun
PAU05_ALL - Small-size pulse blow type PAU-05

Generates pulse air without using electricity!
PAU_ALL - Pulse blow unit
PA_ALL - Solenoid valve PA series (vacuum)

● Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single.
PBDA - Double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Complies with all model non-ion standards. Compact, light weight, and more durable. Used in manufacturing lines in a wide range of industries.
PBDAAS - Integrated type bearing guide

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Bearing integrated into the rod bearing.
PBDACS - Double acting type with replaceable cushion

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. An air cushion is provided at the stroke end, which cushions terminal impact.
PBDAD - Double acting double rod type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Cylinder with piston rods on both ends of the piston.
PBDAE - Double acting pull stroke adjustment type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Cylinder with stroke limiting stopper.
PBDAF - Double acting type heat resistant type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Fluorine packing enables operating temperatures up to 150 degrees. However, a sensor switch cannot be equipped.
PBDAH - Low hydraulic pressure: Double acting type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
PBDAL - Non-rotating double acting type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Hexagon type non-rotating piston rod.
PBDAP - Double acting push stroke adjustment type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Cylinder with stroke limiting stopper.
PBDAT - Double acting multi position type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Two cylinders can be linked in series and three stop positions can be specified.
PBDAU - with speed controller

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Integrated speed controller contributes to space saving.
PBDAW - Dual stroke double acting pull type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Two cylinders can be combined back-to-back for two operation strokes.
PBDA_ALL - Pen cylinders PBDA series

● Φ2.5 to 16 mm [0.098 to 0.630 in] cylinder bore. Complies with all model non-ion standards. A total of 17 variations, from single and double acting types, to types with stroke adjustment mechanisms.
PBSA - Single acting push out type

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Complies with all model non-ion standards. Single acting type with integrated return spring.
PBSAL - Single acting non-rotating push out type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Single acting type with hexagon type non-rotating piston rod, and integrated return spring.
PBSA_2_5_4 - Single acting push out type (small diameter)

● Φ2.5 to 4 mm [0.098 to 0.157 in] cylinder bore. Complies with all model non-ion standards. Single acting type with integrated return spring.
PBTA - Single acting pull

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Complies with all model non-ion standards. Single acting type with integrated return spring.
PBTAL - Single acting non-rotating pull type

● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Compatible with all model non-ion standards. Single acting type with hexagon type non-rotating piston rod, and integrated return spring.
PB_ALL - Solenoid valve PB series (vacuum)

● Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single.
PHP_ALL - Holders and column tubes

● Stronger and easier to use for reliable support of a wide range of machinery and device designs and assemblies.
PLFN_ALL - In-Line Filter PLF050N,PLF100N Series

In-Line Fileter,hollow fiiber membrane,PLF,,PLF050N,PLF100N
PLF_ALL - In-line filters PLF

● Porous hollow fiber membrane element that provides more than 10 times the membrane area as a flat membrane element in the same space. High filtration rating, long life. Perfect as a final filter.
PME_ALL - Inline Ejector PME Series

Convert pressurized air to vacuum in one touch.
POWER_REDUCERS_ALL - Power reducer

● Provides various types of pressure control of drive equipment intake and exhaust air.
PR100_ALL - Precision regulator PR100

● Compact precision regulator with extremely fine pressure settings at a sensitivity of 0.001 MPa.
PR200 - Precision regulator PR200

● Single diaphragm type for high accuracy pressure adjustment in a compact configuration.
PRS_ALL - Precision stainless steel regulator PRS

● Allows highly accurate (0.001 MPa [0.145 psi] sensitivity) pressure settings for solvents used in liquid crystal and semiconductor processes and carrier gas in a pure water circuit, blow pressure, clean air pressure, and gas pressure.
PS3_ALL - Electronic pressure switch PS3

● Pressure switch with micro ejector.
PS4_ALL - Electronic pressure switch PS4

● Small pressure switch with outstanding reliability and response for vacuum and positive pressure. A selection of types for various applications.
PSU_ALL - Separate type multi-channel sensor controller PSU

● Four point simultaneous detections by a single controller. Two output modes: general-purpose type and a micro-pressure compatible type that's great for microscopic workpiece detection.
PURE_HJ - Fluororesin fittings

● High-quality, high-performance fluororesin fittings made possible through the application of vast accumulated pneumatic system equipment technology and know-how. No special tools required.
PURE_TUBE - Fluororesin tubes

● Original advanced molding technology for a variety of high-quality fluororesin tubing. Used in fields from semiconductors, liquid crystals, and other electronics, to various state-of-the-art technologies.
PU_ALL - Plachain ducts

● Tubes and cables are bundled in a smart configuration, which supports quick and easy operation of moving devices. Made of lightweight and highly durable engineering plastic for easy handling.
PVR_ALL - 2- and 3-port chemical solution small valve PVR series

● PVR Series chemical solution use compact 2-, 3-port valves are compact, high flow rate valves for medical analysis with a 1.6 mm orifice. Rocker-type with an internal volume of less than 35 μ liters.
PVS_ALL - 2- and 3-port chemical solution small valve PVS series

● 1.5 mm [0.059 in] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. Perfect for an analyzer dispensing process.
QJS_ALL - Standard type

● A wide range of variations available: speed controller with quick fittings for air cylinder speed control, low-pressure, large flow type, etc.
QJS_LOW_ALL - Low pressure control type

● Low speed type speed controller with quick fitting. Provides easy speed control of low-speed specification air cylinders.
QJ_ALL - Standard type

● Quick fitting for simple attachment and detachment, and wide variety of specifications: NCU specification that does not generate copper ions, non-lubricant specification, and stainless steel for metal parts specification.
QJ_CHECK_ALL - Check valve with quick fitting

● Check valve with quick fitting for simple tube attachment and detachment
QJ_ROTARY_ALL - Rotary type

● Type with integrated smooth moving bearing that is optimal for swinging and rotation, with quick fittings.
QJ_SMART - Smart type

● Quick fitting for outstanding operability and durability that provides a more compact configuration while maintaining fitting function. A lineup of smart types.
QJ_STOP_ALL - With stop valve

● Quick fittings with stop valves
R300M_ALL - Multi series manifold regulators

● Single location checking and adjustment of supply air to multiple lines. The flexibility to meet a variety of different needs.
RAF_ALL - Piston type table type: Flat rotary RAF

● Φ10 to 70 mm [0.394 to 2.756 in] cylinder bore size. Equipped with a cross roller bearing for high accuracy, high rigidity, low center of gravity, and thin configuration. With new pressure-resistant shock absorber for smooth end control.
RAG_ALL - Vane type table type RAG

● Bearings suppress vibration and deflection for high accuracy and high rigidity. A shock absorber can also be equipped for a compact system design.
RAN - Single vane type

● Compact and lightweight for easy mounting. Makes devices more compact. Little air leaking, long life, no oil supply type.
RANS - Single vane sensor equipped type

● Compact and lightweight for easy mounting. Makes devices more compact. Little air leaking, long life, no oil supply type.
RAN_ALL - Vane type RAN

● Compact and lightweight for easy mounting. Makes devices more compact. Little air leaking, long life, no oil supply type.
RAP_ALL - Piston type RAP

● Compact body with one-side surface piping for maximum space economy. Double rack type that eliminates backlash and leakage.
RAT_ALL - Piston type table type RAT

● Lightweight, compact. Bearing provides high accuracy. Easy-to-use table type.
RHDA_ALL - Twist cylinders RHDA series

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. In a single action, the rod moves forward while simultaneously rotating 90 degrees. Slim body and one-location piping ports for a space saving design.
RN - Large FRL series: Regulators

● Large FRL Series regulator.
RN100M - Small FR series: Manifold regulators

● Compact, lightweight manifold regulator.
RN_MINI - Small FR series: Regulators

● Compact, lightweight regulator. Quick fitting for simple tube connection to the device.
RS_ALL - Stainless steel regulator RS

● Perfect for pressure control of solvents used in liquid crystal and semiconductor processes, carrier gas in a pure water circuit, clean air, and gas, as well as other non-grease and non-oil essential lines.
RTLP_ALL - Regulators with Quick Fittings Push Lock Type

New Regulators with Quick Fittings are available!
RTS_ALL - Regulator with quick fitting

● Compact design with convenient built-in quick fitting. With pressure gauge for simple pressure checks.
RZ - RZ Regulator (Rc thread , Mpa Gauge)

● (Rc thread , Mpa Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance.
RZ_NPT - RZ Regulator (NPT thread , psi Gauge)

● (NPT thread , psi Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance.
R_ALL - Multi series: Regulators

● Compact yet with a stable pressure regulator with preset markers included as standard. Select from among standard pressure specification, integrated check mechanism, low-pressure specification.
S125_250_ALL - Shuttle valve

● Shuttle valve that allows air flow in one direction when there is air flow from two directions.
SA - Single acting push out type

● Φ32 to 40 mm [1.260 to 1.575 ini] cylinder bore. Single acting type with integrated return spring. Stainless steel tubing for high quality and high reliability.
SCD_SSUD_ALL - Speed Controller with Dial Adjuster and Push Lock

・Reduce man-hours spent on flow settings!
SCL_ALL - SCL series

● Fine speed adjustment of the Rc1/8 and 1/4 port cylinders.
SC_ALL - SC series

● Fine speed adjustment of M5 and Rc1/8 port cylinders.
SDA_ALL - Swing cylinder SDA series

● Φ25 to 40 mm [0.984 to 1.575 in] cylinder bore. Both oscillation and linear functions incorporated into a single unit. Individual control enables both alternating and simultaneous linear and oscillatory movement.
SGDA - Double acting type with guides

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for use as a conveyor line stopper or lifter. A selection of four mounting types to match the mounting environment and two different port location directions.
SGDAK - End keep double acting type with guides

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
SGDAP - Stroke adjustment double acting type with guides

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. With adjuster mechanism that can be used to limit the output side stroke. Jig cylinder with guide that is now even easier to use.
SGDAP_6_8_10 - Stroke adjustment double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394]

● Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of stroke adjustment type standard jig cylinders with guides.
SGDA_6_8_10 - Double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394]

● Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of standard jig cylinders with guides. Easy to use, saves space.
SGDA_ALL - Jig cylinder with guide SGDA serias

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for use as a conveyor line stopper or lifter. A selection of four mounting types to match the mounting environment and two different port location directions.
SHM11 - Fixed module SHM11

● Handling module with standardized functions and a fixed robot hand unit. Shorter design time and lower cost.
SHM21 - Swivel module SHM21

● Handling module with standardized swiveling functions for the robot hand unit. Shorter design time and lower cost.
SHM31 - Inversion module SHM31

● Handling module with standardized inversion functions for the robot hand unit. Shorter design time and lower cost.
SHM41 - Shift module SHM41

● Handling module with standardized shift functions for direct drive for the robot hand unit. Shorter design time and lower cost.
SHM51 - Cushion module SHM51

● Handling module with standardized cushion functions for the robot hand unit. Shorter design time and lower cost.
SHM61 - Compliance modules SHM61

● Handling module with standardized error absorption functions for the robot hand unit. Shorter design time and lower cost.
SHM61J - Compliance modules SHM61J

● Handling module with standardized error absorption functions for the robot hand unit. Shorter design time and lower cost.
SHM62 - Compliance modules NZ specification SHM62

● Handling module with standardized error absorption functions for the robot hand unit. Shorter design time and lower cost.
SHM62J - Compliance modules NZ specification SHM62J

● Handling module with standardized error absorption functions for the robot hand unit. Shorter design time and lower cost.
SHM71 - Parallel clamp module SHM71

● Handling module with standardized grasping functions for the robot hand unit. Shorter design time and lower cost.
SHM72 - Parallel clamp prong module SHM72

● Handling module with standardized grasping functions for the robot hand unit. Shorter design time and lower cost.
SHM73J - Parallel clamp module SHM73J

● Handling module with standardized grasping functions for the robot hand unit. Shorter design time and lower cost.
SHMJ_ALL - Systematic handling module micro series

● Handling module with standardized grasping functions for the robot hand unit. Shorter design time and lower cost.
SHM_ALL - Systematic handling module

● Handling module with standardized functions for the robot hand unit. Shorter design time and lower cost.
SQE_QE_ALL - Quick exhaust valves

● Quick exhaust valves that are useful for all pneumatic control and piping exhaust
SUPPLY_JOINTS_ALL - Supply joint

● Same inner diameter and low volume as steep pipes used for piping, but requiring half the piping space.
SUS-DA - All stainless steel specification: Double acting type

● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Stainless steel used for components for improved corrosion resistance.
SUT - Double acting type

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving.
SUTK - Double acting type: End keep type

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving.
SUT_ALL - Slide unit

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving.
T-BDA_ALL - Multi mount cylinder (low speed specification)

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-CDA_ALL - Jig cylinder C series (low-speed specification)

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-DA - Double acting type

● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-DAB - Double acting block type

● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-DA_ALL - Slim cylinders (low speed specification)

● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-PBDA_ALL - Pen cylinder (low speed specification)

● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-SGDAQ_ALL - Jig cylinder with guides (low speed specification)

● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-SGDA_6_8_10_ALL - Jig cylinder with guides φ6,8.10 (low speed specification)

● Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
T-TBDA_ALL - Twin rod cylinders (low speed specification)

● Φ6 to 32 mm [0.236 to 1.260 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products.
TAC_J_ALL - TAC fitting (barb)

● Barbed compact fitting series to support various types of small equipment.
TAC_TAC2_V_ALL - TAC valve series

● Compact design, self relieving type and non-relieving type (available on demand).
TBDA - Double acting type

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
TBDAK - End keep double acting type

● Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
TBDAM - Double acting long bushing type

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
TBDA_ALL - Twin rod cylinders TDA6 series

● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
TBSA - Single acting push out type

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Single acting type with integrated return spring.
TDA_ALL - φ6 [0.236] Twin rod cylinder

● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
THROTTLE_VALVES_ALL - Throttle valve

● For pneumatic equipment speed control and pneumatic signal control.
TSC0_ALL - TSCO Series

● Fine speed adjustment of the M3 port cylinder.
TSC_ALL - TSC Series

● Fine speed adjustment of the M5 port cylinder.
TUBE_FOLDERS_ALL - Tube holder

● Allows simple bundling of tubes.
TWDA_ALL - Twin port cylinders TWDA series

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Dual tube structure centralizes connection ports on a single side and eliminates dead space.
URETHANE_TUBE_ALL - Urethane tubes

● Small minimum bend radius for outstanding flexibility, plus outstanding weather resistance and oil resistance.
URETHANE_TUBE_FLAT - Flat tubes (urethane)

● Dual-conduit tubing that is ideal when tubing space is limited, with markings to identify tubes when connecting them.
V030_ALL - Vacuum solenoid valve V030 Series

● Lightweight, compact 2 and 3-port direct drive solenoid vacuum valves. Valves that can be used as both vacuum type and positive pressure type and enable forced breakaway and vacuum destruction incorporated into their own series.
V050_ALL - Vacuum solenoid valve V050 Series

● Lightweight, compact 2 and 3-port direct drive solenoid vacuum valves. Valves that can be used as both vacuum type and positive pressure type and enable forced breakaway and vacuum destruction incorporated into their own series.
V100_ALL - Vacuum solenoid valve V100 Series

● Lightweight, compact 2 and 3-port direct drive solenoid vacuum valves. Valves that can be used as both vacuum type and positive pressure type and enable forced breakaway and vacuum destruction incorporated into their own series.
V112_ALL - Vacuum solenoid valve V112 Series

● Lightweight, compact 2 and 3-port direct drive solenoid vacuum valves. Valves that can be used as both vacuum type and positive pressure type and enable forced breakaway and vacuum destruction incorporated into their own series.
V182_ALL - Vacuum solenoid valve V182 Series

● Lightweight, compact 2 and 3-port direct drive solenoid vacuum valves. Valves that can be used as both vacuum type and positive pressure type and enable forced breakaway and vacuum destruction incorporated into their own series.
V200_ALL - Vacuum solenoid valve V200 Series

● Lightweight, compact 2 and 3-port direct drive solenoid vacuum valves. Valves that can be used as both vacuum type and positive pressure type and enable forced breakaway and vacuum destruction incorporated into their own series.
VA500_VV500_ALL - Round type solenoid valve VA500 Series

● Poppet and diaphragm structure minimizes the chance of leaks, and eliminates valve sticking.
VFN - Small FR series: Vacuum air filters

● Compact, lightweight vacuum filter. Quick fitting for simple tube connection to the device.
VLF_VSF_PLF_CLF_ALL - In-Line Filter

・In-line Filters that protect against pneumatic equipment trouble, keep air clean
VR100_ALL - Vacuum regulator VR

● Mounting on a vacuum line enables vacuum pressure setting to the desired level. Lightweight and compact, easily mounts on a panel simply by drilling holes.
VYP_ALL - Vacuum Handling Unit VYP Series

Light weight design to be mounted on small robots
V_062_126_ALL - Vacuum round solenoid valves V062, V126 series

● Poppet and diaphragm structure minimizes the chance of leaks, and eliminates valve sticking.
V_250_2503_ALL - Round type solenoid valve VA250 Series

● Poppet and diaphragm structure minimizes the chance of leaks, and eliminates valve sticking.
V_MACHINE_BALL - Ball cam type vacuum equipment valve

● Simple diaphragm poppet structure contributes to highly reliable pneumatic control with little down time. A lightweight, compact design fits into just about any installation location and mounting direction.
V_MACHINE_ROLLER - Roller cam type vacuum equipment valve

● Simple diaphragm poppet structure contributes to highly reliable pneumatic control with little down time. A lightweight, compact design fits into just about any installation location and mounting direction.
V_MANUAL_FOOT - Foot valve type: Vacuum manual valve

● Simple diaphragm poppet structure contributes to highly reliable pneumatic control with little down time. A lightweight, compact design fits into just about any installation location and mounting direction.
V_MANUAL_LEVER - Lever type vacuum equipment valve

● Simple diaphragm poppet structure contributes to highly reliable pneumatic control with little down time. A lightweight, compact design fits into just about any installation location and mounting direction.
V_MANUAL_PUSH_BUTTON - Push button type vacuum manual valve

● Simple diaphragm poppet structure contributes to highly reliable pneumatic control with little down time. A lightweight, compact design fits into just about any installation location and mounting direction.
V_PILOT_DOUBLE_ALL - Air-piloted vacuum valve 250A2 series

● Vacuum control double pilot vacuum round type valve that does not use electricity. Perfect for main valves and pilot valves.
V_PILOT_SINGLE_ALL - Air-piloted vacuum valve VA125A series

● Vacuum control main valves, long-life, high-performance vacuum round type valves that are perfect for pilot use.
WHDP_ALL - Wide type air hand WHDP

● Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.
XDA - Double acting bushing type.

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
XDAA - Double acting bearing type

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
XDAAD - Double acting double rod bearing type

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
XDAD - Double acting double rod bushing type.

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
XDADQ - Double acting double rod long bearing type

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
XDAQ - Double acting long bearing type

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
XDA_ALL - Axis cylinders

● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder and both side guides are integrated with each other for high non-rotating accuracy. Can be equipped with a compact shock absorber unit.
YMDA - Double acting type

● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting.
YMDAG - With guides

● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Linear guide equipped in a square body provides space savings and high non-rotating accuracy.
YMDAL - Non-rotating double acting type

● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. Rotationless guides can also be mounted on the body to stop rotation.
YMDA_ALL - High multi cylinders YMDA series

● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting.
YMSA - Single acting push out type

● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. Single acting type with integrated return spring.
YMTA - Single acting pull

● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. Single acting type with integrated return spring.
ZB430_CS9H - ZB430 CS9H with LED

● Applicable cylinders: J Series jig cylinders, slide units, SHM
ZC130_153 - ZC130 ZC153 with LED

● Applicable cylinders: Knock cylinders, multi mount cylinders, pen cylinders dyna cylinders, SD cylinders, TDA, ORV, ORK, RAP, RAN, swing cylinders, air hand CHDUL, SHM
ZC201_205 - ZC201 ZC205 2-lead wire

● Applicable cylinders: Pen cylinders
ZC230_253 - ZC230 ZC253 with LED

● Applicable cylinders: Pen cylinders
ZC301_305 - ZC301 ZC305 2-lead wire

● Applicable cylinders: AGTB, AGTC, ORCJ, MRC
ZC330_353 - ZC330 ZC353 with LED

● Applicable cylinders: AGTB, AGTC
ZC601_605 - ZC601 ZC605 2-lead wire

● Applicable cylinders: Axis cylinders
ZC630_653 - ZC630 ZC653 with LED

● Applicable cylinders: Axis cylinders
ZE101_102_201_202 - ZE101 ZE102 ZE201 ZE202 2-lead wire

● Applicable cylinders: C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, multi sliders, ORV, ORS, MRS, ORW, MRW, RAT
ZE135_155_235_255 - ZE135 ZE155 ZE235 ZE255 with LED

● Applicable cylinders: Mini bit, C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, ZS, ORV, ORS, MRS, ORW, MRW, NHB, WHDP, AFDPG, RAT
ZE175_275 - ZE175 ZE275 3-lead wire, with LED

● Applicable cylinders: Mini bit, C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, ZS, ORV, ORS, MRS, ORW, MRW, NHB, WHDP, AFDPG, RAT
ZG530_553 - ZG530 ZG553 with LED

● Applicable cylinders: Slim cylinders, twin port cylinders, ORC, ORCA, ORK, MRG, swing cylinders, twist cylinders
ZL1_ALL - Linear magnetic sensor controller ZL1 series

● Allows cylinder position detection of workpieces of different widths, etc. Supports four-point switch output. Allows simple position detection.
ZL2_ALL - Linear magnetic sensor controller Long Type ZL2 series

● Sensing range is expanded. Allows cylinder position detection of workpieces of different widths, etc. Supports four-point switch output. Allows simple position detection.
ZMA_ALL - Stroke sensor ZM series

● Air cylinder stop position can be specified in 1/100 mm units. Combining with a counter enable history management based on workpiece acceptance/rejection judgment or data import.
ZS_ALL - Z slider ZS series

● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Thin actuator with linear guide. Twin rod for high output.

Product Search

Categories